One ought to all the time reduce high precision machining elements within the boundary of the sheet dimension and not use the sheet edges as a border. During laser chopping a portion of the material is burnt away when the laser cuts by way of, leaving a small gap. This ‘gap’ identified as|is called|is named} the laser kerf and ranges from 0.08 – 0.45mm depending on the material sort, thickness and other conditional factors. A minimal distance of 1-2mm between elements must be left to avoid unintended crossover chopping. Bend reliefs will be no deeper than the material thickness plus the bend radius. Bend 2 reveals an oblong relief reduce into the part, the depth of the relief should be greater than the radius of the bend.
One ought to all the time reduce high precision machining elements within the boundary of the sheet dimension and not use the sheet edges as a border. During laser chopping a portion of the material is burnt away when the laser cuts by way of, leaving a small gap. This ‘gap’ identified as|is called|is named} the laser kerf and ranges from 0.08 – 0.45mm depending on the material sort, thickness and other conditional factors. A minimal distance of 1-2mm between elements must be left to avoid unintended crossover chopping. Bend reliefs will be no deeper than the material thickness plus the bend radius. Bend 2 reveals an oblong relief reduce into the part, the depth of the relief should be greater than the radius of the bend.
ОтветитьУдалить